Контакты

(383)383-25-35
г. Новосибирск, мкр. Горский, 66, 2 этаж

XW5_-S

Клеммные блоки с винтовыми клеммами для монтажа на DIN-рейку

Клеммные блоки для монтажа на DIN-рейку в шкафах управления, отвечающие международным стандартам

Винтовой зажим для удержания провода
Широкий диапазон допустимых сечений провода: от 2,5 до 150 мм²
Доступны клеммные блоки с плавкими предохранителями и клеммные блоки с размыкателями

Ordering information

Classification	Product Type	Nominal Cross Section (mm²)	Number of levels	Number of cramp position per level	Color	Insulating material	Flammability Rating according to UL94	Pack (pcs.)	Weight (gram)	Order code
Feed Through terminal blocks	Standard terminals	2.5	1	2	Dark gray	PA	V0	100	8	XW5T-S2.5-1.1-1
		2.5	1	2	Blue	PA	V0	100	8	XW5T-S2.5-1.1-1BL
		4.0	1	2	Dark gray	PA	V0	100	9	XW5T-S4.0-1.1-1
		4.0	1	2	Blue	PA	V0	100	9	XW5T-S4.0-1.1-1BL
		6.0	1	2	Dark gray	PA	V0	100	14	XW5T-S6.0-1.1-1
		6.0	1	2	Blue	PA	V0	100	14	XW5T-S6.0-1.1-1BL
		10.0	1	2	Dark gray	PA	V0	50	17	XW5T-S10-1.1-1
		10.0	1	2	Blue	PA	V0	50	17	XW5T-S10-1.1-1BL
		16.0	1	2	Dark gray	PA	V0	50	37	XW5T-S16-1.1-1
		16.0	1	2	Blue	PA	V0	50	37	XW5T-S16-1.1-1BL
		35.0	1	2	Dark gray	PA	V0	20	74	XW5T-S35-1.1-1
		35.0	1	2	Blue	PA	V0	20	74	XW5T-S35-1.1-1BL
		70.0	1	2	Dark gray	PA	V0	20	177	XW5T-S70-1.1-1
		70.0	1	2	Blue	PA	V0	20	177	XW5T-S70-1.1-1BL
		150.0	1	2	Dark gray	PA	V0	10	281	XW5T-S150-1.1-1
		150.0	1	2	Blue	PA	V0	10	282	XW5T-S150-1.1-1BL
	Multi tiers terminal	2.5	2	2	Dark gray	PA	V0	100	13	XW5T-S2.5-1.1-2
		2.5	2	2	Black	PA	V0	100	15	XW5T-S2.5-1.1-2V
		4.0	2	2	Dark gray	PA	V0	100	19	XW5T-S4.0-1.1-2
		4.0	2	2	Black	PA	V0	100	20	XW5T-S4.0-1.1-2V
	Multi conductor terminals	4.0	1	3	Dark gray	PA	V0	100	13	XW5T-S4.0-1.2-1
		4.0	1	4	Dark gray	PA	V0	100	17	XW5T-S4.0-2.2-1
		4.0	1	3	Blue	PA	V0	100	13	XW5T-S4.0-1.2-1BL
		4.0	1	4	Blue	PA	V0	100	17	XW5T-S4.0-2.2-1BL
Grounding terminal blocks	Standard terminals	2.5	1	2	Green/ yellow	PA	V0	100	10	XW5G-S2.5-1.1-1
		4.0	1	2		PA	V0	100	12	XW5G-S4.0-1.1-1
		6.0	1	2		PA	V0	100	20	XW5G-S6.0-1.1-1
		10.0	1	2		PA	V0	50	23	XW5G-S10-1.1-1
		16.0	1	2		PA	V0	50	47	XW5G-S16-1.1-1
		35.0	1	2		PA	V0	20	123	XW5G-S35-1.1-1
		70.0	1	2		PA	V0	20	240	XW5G-S70-1.1-1
	Multi tiers terminal	4.0	2	2		PA	V0	100	23	XW5G-S4.0-1.1-2
	Multi conductor terminals	4.0	1	3		PA	V0	100	16	XW5G-S4.0-1.2-1
	Multi conductor terminals	4.0	1	4		PA	V0	100	20	XW5G-S4.0-2.2-1
Special terminals	Knife edge disconnect block	4.0	1	2	Dark gray	PA	V0	50	19	XW5T-S4.0-FU5
	Knife edge disconnect block	4.0	1	2		PA	V0	50	22	XW5T-S4.0-FU6
	Fuse terminal	4.0	1	2		PA	V0	100	12	XW5T-S4.0-KD

Accessories

Short Bars

Applicable terminal blocks	No. of poles	Color	Pack (pcs.)	Order code
XW5_-S2.5-_	2	Yellow (YL)	10	XW5S-S2.5-2
	3		10	XW5S-S2.5-3
	4		10	XW5S-S2.5-4
	5		10	XW5S-S2.5-5
	10		20	XW5S-S2.5-10
XW5_-S4.0-_	2	Yellow (YL)	10	XW5S-S4.0-2
	3		10	XW5S-S4.0-3
	4		10	XW5S-S4.0-4
	5		10	XW5S-S4.0-5
	10		20	XW5S-S4.0-10
XW5_-S6.0-_	2	Yellow (YL)	10	XW5S-S6.0-2
	3		10	XW5S-S6.0-3
	4		10	XW5S-S6.0-4
	5		10	XW5S-S6.0-5
XW5_-S10-_	2	Yellow (YL)	10	XW5S-S10-2
XW5_-S16-_	2	Yellow (YL)	10	XW5S-S16-2

Cross connector with screw

Applicable terminal blocks	No. of poles	Color	Pack (pcs.)	Order code
XW5_-S2.5-1.1-2_	2	Yellow (YL)	10	XW5S-S2.5-2N
	3		10	XW5S-S2.5-3N
	4		10	XW5S-S2.5-4N
	5		10	XW5S-S2.5-5N
	10		10	XW5S-S2.5-10N

End covers

Applicable terminal blocks	Pack (pcs.)	Order code
XW5_-S2.5-1.1-_ XW5_-S4.0-1.1-_ XW5_-S6.0-1.1-_ XW5_-S10-1.1-_	10	XW5E-S2.5
XW5T-S16-1.1-_	10	XW5E-S16
XW5T-S4.0-KD XW5_-S4.0-1.2-1	10	XW5E-S4.0-1.2-1
XW5_-S4.0-2.2-1	10	XW5E-S4.0-2.2-1
XW5_-S4.0-1.1-2_	10	XW5E-S4.0-1.1-2
XW5T-S2.5-1.1-2_	10	XW5E-S2.5N

Separator plates

Applicable terminal blocks	Pack (pcs.)	Order code
XW5_-S2.5-1.1-_ XW5_-S4.0-1.1-_ XW5_-S6.0-1.1-_ XW5_-S10-1.1-_	10	XW5Z-S2.5PT

Applicable terminal blocks

Pack
(pcs.)

Order code

XW5_-S2.5-1.1-_

XW5_-S4.0-1.1-_

XW5_-S6.0-1.1-_

XW5_-S10-1.1-_

XW5Z-S2.5PT

Labels

Applicable terminal blocks	Marking	Pack (pcs.)	Order code
XW5_-S2.5-_	None	25	XW5Z-S2.5LB
	1-10	25	XW5Z-S2.5LB-1-10
	11-20	25	XW5Z-S2.5LB-11-20
	21-30	25	XW5Z-S2.5LB-21-30
	31-40	25	XW5Z-S2.5LB-31-40
	41-50	25	XW5Z-S2.5LB-41-50
	51-60	25	XW5Z-S2.5LB-51-60
	61-70	25	XW5Z-S2.5LB-61-70
	71-80	25	XW5Z-S2.5LB-71-80
	81-90	25	XW5Z-S2.5LB-81-90
	91-100	25	XW5Z-S2.5LB-91-100
	1-100	11	XW5Z-S2.5LB-1-100
XW5_-S4.0-_	None	25	XW5Z-S4.0LB
	1-10	25	XW5Z-S4.0LB-1-10
	11-20	25	XW5Z-S4.0LB-11-20
	21-30	25	XW5Z-S4.0LB-21-30
	31-40	25	XW5Z-S4.0LB-31-40
	41-50	25	XW5Z-S4.0LB-41-50
	51-60	25	XW5Z-S4.0LB-51-60
	61-70	25	XW5Z-S4.0LB-61-70
	71-80	25	XW5Z-S4.0LB-71-80
	81-90	25	XW5Z-S4.0LB-81-90
	91-100	25	XW5Z-S4.0LB-91-100
	1-100	11	XW5Z-S4.0LB-1-100
XW5_-S6.0-_	None	25	XW5Z-S6.0LB
	1-10	25	XW5Z-S6.0LB-1-10
	11-20	25	XW5Z-S6.0LB-11-20
	21-30	25	XW5Z-S6.0LB-21-30
	31-40	25	XW5Z-S6.0LB-31-40
	41-50	25	XW5Z-S6.0LB-41-50
	51-60	25	XW5Z-S6.0LB-51-60
	61-70	25	XW5Z-S6.0LB-61-70
	71-80	25	XW5Z-S6.0LB-71-80
	81-90	25	XW5Z-S6.0LB-81-90
	91-100	25	XW5Z-S6.0LB-91-100
	1-100	11	XW5Z-S6.0LB-1-100

Specifications

Feed through terminal blocks

		XW5T-S2.5-1.1-1(BL)	XW5T-S4.0-1.1-1(BL)	XW5T-S6.0-1.1-1(BL)	XW5T-S10-1.1-1(BL)	XW5T-S16-1.1-1(BL)	XW5T-S35-1.1-1(BL)	XW5T-S70-1.1-1(BL)
Appearance
Internal wiring		1 tier, 1:1	1 tier, 1:1	1 tier, 1:1	1 tier, 1:1	1 tier, 1:1	1 tier, 1:1	1 tier, 1:1
Applicable wire sizes	Nominal cross section	2.5 mm²	4.0 mm²	6.0 mm²	10 mm²	16 mm²	35 mm²	70 mm²
	Minimum conductor cross section solid	0.14 mm²	0.14 mm²	0.2 mm²	0.5 mm²	1.5 mm²	10 mm²	−
	Maximum conductor cross section solid	4.0 mm²	6.0 mm²	10 mm²	16 mm²	16 mm²	10 mm²	−
	Minimum conductor cross section fine stranded	0.14 mm²	0.14 mm²	0.2 mm²	0.5 mm²	4.0 mm²	10 mm²	10 mm²
	Maximum conductor cross section fine stranded	4.0 mm²	6.0 mm²	10 mm²	16 mm²	25 mm²	35 mm²	70 mm²
	Minimum conductor cross section (flex., stranded) with cable end sleeve	0.5 mm²	0.5 mm²	0.5 mm²	0.5 mm²	1.5 mm²	−	−
	Maximum conductor cross section (flex., stranded) with cable end sleeve	2.5 mm²	4.0 mm²	6.0 mm²	10 mm²	16 mm²	−	−
	Conductor cross section AWG	AWG26 to AWG12	AWG26 to AWG10	AWG24 to AWG8	AWG20 to AWG6	AWG14 to AWG4	AWG10 to AWG 1/0	AWG6 to AWG 2/0
	Wire strip length	9 mm	9 mm	11 mm	13 mm	15 mm	18 mm	24 mm
Tightening torque		0.4 Nm	0.5 Nm	1.2 Nm	1.2 Nm	2 Nm	3 Nm	6 Nm
Dimensions		5×48.2×56	6×48.2×56	8×48.2×56	10×48.2×56.2	12×58.5×62	16×63×75.1	24×75.2×88.7
Mounting rail		TH35	TH35	TH35	TH35	TH35	TH35	TH35
IEC rated voltage		1,000 V	1,000 V	1,000 V	1,000 V	1,000 V	800 V	800 V
IEC rated current		24 A	32 A	41 A	57 A	76 A	124 A	179 A
Rated impulse voltage		8 kV	8 kV	8 kV	8 kV	8 kV	8 kV	8 kV
UL rated voltage		600 V	600 V	600 V	600 V	600 V	600 V	600 V
UL rated current		20 A	30 A	50 A	65 A	85 A	150 A	175 A
End Covers		XW5E-S2.5-1.1-1	XW5E-S2.5-1.1-1	XW5E-S2.5-1.1-1	XW5E-S2.5-1.1-1	XW5E-S16
Applicable nameplates		XW5Z-S2.5LB	XW5Z-S4.0LB_	XW5Z-S6.0LB_	−	−	−	−
Applicable Short Bars		XW5S-S4.0-_ (_: Poles = 2, 3, 4, 5 or 10)	XW5S-S4.0-_ (_: Poles = 2, 3, 4, 5 or 10)	XW5S-S6.0-_ (_: Poles = 2,3, 4, or 5)	XW5S-S10-_ (_: Poles = 2)	XW5S-S16-_ (_: Poles = 2)	−	−

		XW5T-S150-1.1-1(BL)	XW5T-S2.5-1.1-2	XW5T-S2.5-1.1-2V	XW5T-S4.0-1.2-1(BL)	XW5T-S4.0-2.2-1(BL)	XW5T-S4.0-1.1-2	XW5T-S4.0-1.1-2V
Appearance
Internal wiring		1 tier, 1:1	2 tiers, 2:2	2 tiers, 2:2	1 tier, 1:2	1 tier, 2:2	2 tiers, 1:1	2 tiers, 1:1
Applicable wire sizes	Nominal cross section	150 mm²	2.5 mm²	2.5 mm²	4.0 mm²	4.0 mm²	4.0 mm²	4.0 mm²
	Minimum conductor cross section solid	−	0.2 mm²	0.2 mm²	0.14 mm²	0.14 mm²	0.14 mm²	0.14 mm²
	Maximum conductor cross section solid	−	4.0 mm²	4.0 mm²	6.0 mm²	6.0 mm²	6.0 mm²	6.0 mm²
	Minimum conductor cross section fine stranded	35 mm²	0.14 mm²	0.14 mm²	0.14 mm²	0.14 mm²	0.14 mm²	0.14 mm²
	Maximum conductor cross section fine stranded	150 mm²	2.5 mm²	2.5 mm²	6.0 mm²	6.0 mm²	6.0 mm²	6.0 mm²
	Minimum conductor cross section (flex., stranded) with cable end sleeve	−	−	−	0.5 mm²	0.5 mm²	0.5 mm²	0.5 mm²
	Maximum conductor cross section (flex., stranded) with cable end sleeve	−	−	−	4.0 mm²	4.0 mm²	4.0 mm²	4.0 mm²
	Conductor cross section AWG	AWG 2/0 to 350 kcmil	AWG22 to AWG12	AWG22 to AWG12	AWG26 to AWG10	AWG26 to AWG10	AWG26 to AWG10	AWG26 to AWG10
	Wire strip length	30 mm	8 mm	8 mm	9 mm	9 mm	9 mm	9 mm
Tightening torque		10 Nm	0.4 Nm	0.4 Nm	0.5 Nm	0.5 Nm	0.5 Nm	0.5 Nm
Dimensions		28×96×106.1	5×65.8×71.4	5×65.8×71.4	6×58×56	6×69×58	6×73×75	6×73×75
Mounting rail		TH35	TH35	TH35	TH35	TH35	TH35	TH35
IEC rated voltage		1,000 V	500 V	500 V	500 V	500 V	800 V	800 V
IEC rated current		309 A	24 A	24 A	32 A	32 A	32 A	32 A
Rated impulse voltage		8 kV	6 kV	6 kV	6 kV	6 kV	8 kV	8 kV
UL rated voltage		600 V	600 V	600 V	300 V	300 V	300 V	300 V
UL rated current		335 A	20 A	20 A	30 A	30 A	30 A	30 A
End Covers		−	XW5E-S2.5N	XW5E-S2.5N	XW5E-S4.0-1.2-1	XW5E-S4.0-2.2-1	XW5E-S4.0-1.1-2	XW5E-S4.0-1.1-2
Applicable nameplates		−	XW5Z-2.5LB_	XW5Z-2.5LB_	XW5Z-4.0LB_	XW5Z-4.0LB_	XW5Z-4.0LB_	XW5Z-4.0LB_
Applicable Short Bars		−	XW5S-S2.5-_N (_: Poles = 2, 3, 4, 5, or 10)	XW5S-S2.5-_N (_: Poles = 2, 3, 4, 5, or 10)	XW5S-S4.0-_ (_: Poles = 2, 3, 4, 5, or 10)	XW5S-S4.0-_ (_: Poles = 2, 3, 4, 5, or 10)	XW5S-S4.0-_ (_: Poles = 2, 3, 4, 5, or 10)	XW5S-S4.0-_ (_: Poles = 2, 3, 4, 5, or 10)

Grounding terminal blocks

		XW5G-S2.5-1.1-1	XW5G-S4.0-1.1-1	XW5G-S6.0-1.1-1	XW5G-S10-1.1-1	XW5G-S16-1.1-1
Appearance
Internal wiring		1 tier, 1:1	1 tier, 1:1	1 tier, 1:1	1 tier, 1:1	1 tier, 1:1
Applicable wire sizes	Nominal cross section	2.5 mm²	4.0 mm²	6.0 mm²	10 mm²	16 mm²
	Minimum conductor cross section solid	0.14 mm²	0.14 mm²	0.2 mm²	0.5 mm²	1.5 mm²
	Maximum conductor cross section solid	4.0 mm²	6.0 mm²	10 mm²	16 mm²	16 mm²
	Minimum conductor cross section fine stranded	0.14 mm²	0.14 mm²	0.2 mm²	0.5 mm²	4.0 mm²
	Maximum conductor cross section fine stranded	4.0 mm²	6.0 mm²	10 mm²	16 mm²	25 mm²
	Minimum conductor cross section (flex., stranded) with cable end sleeve	0.5 mm²	0.5 mm²	0.5 mm²	0.5 mm²	1.5 mm²
	Maximum conductor cross section (flex., stranded) with cable end sleeve	2.5 mm²	4.0 mm²	6.0 mm²	10 mm²	16 mm²
	Conductor cross section AWG	AWG26 to AWG12	AWG26 to AWG10	AWG24 to AWG8	AWG20 to AWG6	AWG14 to AWG4
	Wire strip length	9 mm	9 mm	11 mm	13 mm	15 mm
Tightening torque		0.4 Nm	0.5 Nm	1.2 Nm	1.2 Nm	2 Nm
Dimensions		5×48.2×56	6×48.2×56	8×48.2×56	10×48.2×56.2	12×58.5×62
Mounting rail		TH35	TH35	TH35	TH35	TH35
IEC rated voltage		1,000 V	1,000 V	1,000 V	1,000 V	1000 V
IEC rated current		−	−	−	−	−
Rated impulse voltage		8 kV	8 kV	8 kV	8 kV	8 kV
UL rated voltage		600 V	600 V	600 V	600 V	600 V
UL rated current		−	−	−	−	−
End Covers		XW5E-S2.5	XW5E-S2.5	XW5E-S2.5	XW5E-S2.5	XW5E-S16
Applicable nameplates		XW5Z-S2.5LB_	XW5Z-S4.0LB_	XW5Z-S6.0LB_	−	−
Applicable Short Bars		−	−	−	−	−

		XW5G-S35-1.1-1	XW5G-S70-1.1-1	XW5G-S4.0-1.2-1	XW5G-S4.0-2.2-1	XW5G-S4.0-1.1-2
Appearance
Internal wiring		1 tier, 1:1	1 tier, 1:1	1 tier, 1:2	1 tier, 2:2	2 tiers, 1:1
Applicable wire sizes	Nominal cross section	35 mm²	70 mm²	4.0 mm²	4.0 mm²	4.0 mm²
	Minimum conductor cross section solid	10 mm²	−	0.14 mm²	0.14 mm²	0.14 mm²
	Maximum conductor cross section solid	35 mm²	−	6 mm²	6 mm²	6 mm²
	Minimum conductor cross section fine stranded	10 mm²	10 mm²	0.14 mm²	0.14 mm²	0.14 mm²
	Maximum conductor cross section fine stranded	35 mm²	70 mm²	6 mm²	6 mm²	6 mm²
	Minimum conductor cross section (flex., stranded) with cable end sleeve	−	−	0.5 mm²	0.5 mm²	0.5 mm²
	Maximum conductor cross section (flex., stranded) with cable end sleeve	−	−	4 mm²	4 mm²	4 mm²
	Conductor cross section AWG	AWG10 to AWG2	AWG6 to AWG 2/0	AWG26 to AWG10	AWG26 to AWG10	AWG26 to AWG10
	Wire strip length	20 mm	24 mm	9 mm	9 mm	9 mm
Tightening torque		3 Nm	6 Nm	0.5 Nm	0.5 Nm	0.5 Nm
Dimensions		16×63×75.1	24×75.2×88.7	6×58×56	6×69×58	6×73×75
Mounting rail		TH35	TH35	TH35	TH35	TH35
IEC rated voltage		800 V	800 V	500 V	500 V	800 V
IEC rated current		−	−	−	−	−
Rated impulse voltage		8 kV	8 kV	6 kV	6 kV	8 kV
UL rated voltage		600 V	600 V	300 V	300 V	300 V
UL rated current		−	−	−	−	−
End Covers		−	−	XW5E-S4.0-1.2-1	XW5E-S4.0-2.2-1	XW5E-S4.0-1.1-2
Applicable nameplates		−	−	XW5Z-4.0LB_	XW5Z-4.0LB_	XW5Z-4.0LB_
Applicable Short Bars		−	−	−	−	−

Terminal blocks with fuses

Model		XW5T-S4.0-FU5	XW5T-S4.0-FU6
Appearance
Internal wiring		1 tier, 1:1	1 tier, 1:1
Applicable wire sizes	Nominal cross section	4.0 mm²	4.0 mm²
	Minimum conductor cross section solid	0.5 mm²	0.5 mm²
	Maximum conductor cross section solid	6 mm²	6 mm²
	Minimum conductor cross section fine stranded	0.5 mm²	0.5 mm²
	Maximum conductor cross section fine stranded	4 mm²	4 mm²
	Minimum conductor cross section (flex., stranded) with cable end sleeve	−	−
	Maximum conductor cross section (flex., stranded) with cable end sleeve	−	−
	Conductor cross section AWG	AWG22 to AWG10	AWG22 to AWG10
	Wire strip length	8 mm	8 mm
Tightening torque		0.5 Nm	0.5 Nm
Dimensions		8×77.2×62	10×77.2×62
Mounting rail		TH35	TH35
IEC rated voltage		800 V	800 V
IEC rated current		6.3 A	10 A
Rated impulse voltage		8 kV	8 kV
UL rated voltage		600 V	600 V
UL rated current		15 A	15 A
End Covers		−	−
Applicable nameplates		−	−
Applicable Short Bars		−	−

Technical Information for XW5T-S4.0-FU5, XW5T-S4.0-FU6

The fuse blocks of this type have a flip top disconnect lever. It accepts miniature fuses of 5×20, 5×25 and 5×30 mm (terminal width: 8 mm) or 6.3×32 mm (terminal width: 10 mm). The hinged lever has latch points both in the open and in the closed position, and can be sealed.

Depending on the application and the installation method, the circumstances for increased temperature must be checked in the closed fuse holders. Higher ambient temperatures are an additional load for the fuse inserts. Therefore, the reduction of the rated current must be considered accordingly in these applications.

Disconnect terminal blocks

Model		XW5T-S4.0-KD
Appearance
Internal wiring		1 tier, 1:1
Applicable wire sizes	Nominal cross section	4.0 mm²
	Minimum conductor cross section solid	0.14 mm²
	Maximum conductor cross section solid	6 mm²
	Minimum conductor cross section fine stranded	0.14 mm²
	Maximum conductor cross section fine stranded	6 mm²
	Minimum conductor cross section (flex., stranded) with cable end sleeve	0.5 mm²
	Maximum conductor cross section (flex., stranded) with cable end sleeve	4 mm²
	Conductor cross section AWG	AWG26 to AWG10
	Wire strip length	9 mm
Tightening torque		0.5 Nm
Dimensions		6×58×58
Mounting rail		TH35
IEC rated voltage		500 V
IEC rated current		20 A
Rated impulse voltage		6 kV
UL rated voltage		300 V
UL rated current		16 A
End Covers		XW5E-S4.0-1.2-1
Applicable nameplates		XW5Z-S4.0LB_
Applicable Short Bars		XW5S-S4.0-_

Short Bars

Model	XW5S-S2.5-_	XW5S-S4.0-_	XW5S-S6.0-_	XW5S-S10-_	XW5S-S16-_
IEC rated voltage	600 V			1,000 V
IEC rated current	20 A	30 A	50 A	57 A	76 A
UL rated voltage	600 V
UL rated current	20 A	30 A	50 A	65 A	85 A
Compliant standards	UL
Compliant standards	IEC60947-7-1

Characteristics

Operating temperature range	−40 to 60°C (with no condensation or icing)
Insulating material	PA
Flammability rating according to UL 94	V0
Operating humidity	range 5% to 95%
Compliant standards	cULus (UL 1059), IEC 60947-7-1 and IEC 60947-7-2
Vibration resistance	5 to 150 Hz 0.964 (m/s²)²/Hz
Shock resistance	50 m/s² 30 ms according EN 61373

1. Box including 250 pcs.

Брошюры

Xw5 series Брошюра

enPDF 1,1 МБ

Показать все Брошюры

Спецификации

XW5_-S Спецификация

enPDF 6,1 МБ

Показать все Спецификации