Контакты

(383)383-25-35
г.Новосибирск, ул. Петухова 63/4, 2 этаж, офис 14

E3JM

Фотоэлектрический датчик в пластмассовом корпусе на несколько напряжений с таймером

Семейство квадратных датчиков E3JM с таймером и питанием от 12 - 240 В пост. тока и 24 - 240 В перем. тока на большие расстояния.

Напряжение питания 12 - 240 В пост. тока и 24 - 240 В перем. тока
Вывод для реле или полупроводникового реле
Таймер

Ordering information

Sensing method	Appearance	Connection method	Sensing distance	Operation mode	Output configuration	Functions	Order code
Sensing method	Appearance	Connection method	Sensing distance	Operation mode	Output configuration	Functions	Conduit socket thread size: PF1/2	Conduit socket thread size: PG13.5	Conduit socket thread size: 1/2-14NPT UL-listed models
Through-beam (Emitter + Receiver)1		Terminal block	10 m	Light-ON Dark-ON (switch selectable)	Relay	−	E3JM-10M4-NN	E3JM-10M4-G-NN	E3JM-10M4-NN-US
					Relay	Timer	E3JM-10M4T-NN	E3JM-10M4T-G-NN	E3JM-10M4T-NN-US
					DC SSR	−	E3JM-10S4-NN	E3JM-10S4-G-NN	E3JM-10S4-NN-US
					DC SSR	Timer	E3JM-10S4T-NN	E3JM-10S4T-G-NN	E3JM-10S4T-NN-US
Retro-reflective with MSR function	E39-R1 (provided)		4 m		Relay	−	E3JM-R4M4	E3JM-R4M4-G	E3JM-R4M4-US
					Relay	Timer	E3JM-R4M4T	E3JM-R4M4T-G	E3JM-R4M4T-US
					DC SSR	−	E3JM-R4S4	E3JM-R4S4-G	E3JM-R4S4-US
					DC SSR	Timer	E3JM-R4S4T	E3JM-R4S4T-G	E3JM-R4S4T-US
Diffuse-reflective			700 mm		Relay	−	E3JM-DS70M4	E3JM-DS70M4-G	E3JM-DS70M4-US
					Relay	Timer	E3JM-DS70M4T	E3JM-DS70M4T-G	E3JM-DS70M4T-US
					DC SSR	−	E3JM-DS70S4	E3JM-DS70S4-G	E3JM-DS70S4-US
					DC SSR	Timer	E3JM-DS70S4T	E3JM-DS70S4T-G	E3JM-DS70S4T-US

Specifications

Sensing method		Through-beam model	Retro-reflective model (with MSR function)	Diffuse-reflective model
Item	Model	E3JM-10⬜4(T)-NN E3JM-10⬜4(T)-G-NN E3JM-10⬜4(T)-NN-US	E3JM-R4⬜4(T) E3JM-R4⬜4(T)-G E3JM-R4⬜4(T)-US	E3JM-DS70⬜4(T) E3JM-DS70⬜4(T)-G E3JM-DS70⬜4(T)-US
Sensing distance		10 m	4 m (When using E39-R1)	White paper (200 × 200 mm): 700 mm
Standard sensing object		Opaque: 14.8-mm dia. min.	Opaque: 75-mm dia. min.	---
Light source (wavelength)		Infrared LED (950 nm)	Red LED (660 nm)	Infrared LED (950 nm)
Power supply voltage		12 to 240 VDC±10%, ripple (p-p): 10% max. 24 to 240 VAC±10%, 50/60 Hz
Response time	Relay output	(E3JM-⬜⬜M4 (T)(-⬜) models) Operate or reset: 30 ms max.
Response time	DC SSR output	(E3JM-⬜⬜S4 (T)(-⬜) models) Operate or reset: 5 ms max.
Ambient temperature range		Operating: −25°C to 55°C, Storage: −30°C to 70°C (with no icing or condensation)
Degree of protection		IEC 60529: IP66
Connection method		Terminal block
Material	Case	ABS (Acrylonitril Butadiene Styrene)
	Lens	Methacrylic resin
	Cover	Polycarbonate
	Mounting Bracket	Iron

1. Through-beam Sensors are sold in sets that include both the Emitter and Receiver. An order for the Emitter or Receiver alone cannot be accepted.

Reflectors for retro-reflective photoelectric sensors

Type	Housing material	Features	Size in mm	Applicable Sensor	Order code
General purpose reflectors	ABS base Acrylic surface	Surface screw mounting (diagonal holes)	40 × 60 × 7.5	Retro-reflective photoelectric sensors with and without M.S.R	E39-R1S
		Surface screw mounting (holes on one side only)	35.4 × 42.3 × 8		E39-R9
		Surface screw mounting (holes on one side only)	51.4 × 60.3 × 8.5		E39-R42
Small size		Side screw mounting or surface selfadhesive	41.8 × 22.5 × 11		E39-R3
Small size		Surface screw mounting	23 × 13.7 × 4.9		E39-R4
Large size			100 × 100 × 9		E39-R8
Large size			84.5 × 84.5 × 8.7		E39-R40
High precision		Microtripel for improved performance with fine beam sensors	52 × 40 × 4.8	Recommended for fine beam coaxial models (E3NC-LH03, E3S-DB, E3T-SR4)	E39-R6
			30 × 45		E39-R12
			14 × 23 × 1		E39-R37-CA
			12 × 24		E39-R13
Simple mounting		Round shape with centered mounting hole for simple screw mounting	Diameter: 84 Depth: 7.4	Photoelectric sensors with and without M.S.R.	E39-R7

Note: the ambient operating temperature is -25°C to 55°C unless otherwise specified

Shape	Type	Housing material	Features	Size in mm	Applicable Sensor		Order code
	Enhanced detergent resistance	PVC	Surface screw mounting IP69k after DIN 40050 part 9	40 × 60 × 7.5	Recommended for harsh environment sensors		E39-R50
		PET	Surface screw mounting IP69k after DIN 40050 part 9 Anti-fogging coating	40 × 60 × 7.5			E39-R50K
		PVC	Surface screw mounting IP69k after DIN 40050 part 9	20 × 60 × 6			E39-R51
	Highest detergent resistance	SUS316L Borosilicat	Surface screw mounting	43 × 30 × 5			E39-R16
	Heat resistant	Borosilicat	Surface screw mounting 450°C heat resistance Suitable for vacuum environment	95 × 51 × 8			E39-R47
	Non-fogging reflector	ABS Acrylic surface	Anti-fogging coating	40 × 60 × 7.5			E39-R1K
	Special polarizing	ABS base PMMA surface	Special polarizing filter to PET	44 × 80 × 8.5	E3ZM-B, E3FA-B, E3FB-B, E3S-DB		E39-RP1
	Oil-resistant Reflector	Methacrylate resin surface Aluminium, Stainless steel screws	Resistant to cutting oil	65.4 × 106 × 11.5	E3ZR-C		E39-R1R
	General purpose tape reflectors	Acrylic	Self adhesive Pre cut	35 × 10 × 0.6	Photoelectric sensors with and without M.S.R.		E39-RS1
				35 × 10 × 0.6		Optimised for E3T-SR4	E39-RS1-CA
				40 × 35 × 0.6			E39-RS2
				40 × 35 × 0.6		Optimised for E3T-SR4	E39-RS2-CA
				80 × 70 × 0.6			E39-RS3
				80 × 70 × 0.6		Optimised for E3T-SR4	E39-RS3-CA
			Self adhesive Cut-to-length, roll material	25 mm × 5 m			E39-RS25 5 m
				25 mm × 22.8 m			E39-RS25 22.8 m
				50 mm × 5 m			E39-RS50 5 m
				50 mm × 22.8 m			E39-RS50 22.8 m
	High precision tape reflectors		Self adhesive Pre cut	195 × 22	Recommended for fine beam and laser sensors (E3NC-LH03, E3Z-LR, E3S-DB_2)		E39-RS4
	High precision tape reflectors		Self adhesive Pre cut	108 × 46			E39-RS5

Note: Note: the ambient operating temperature is -25°C to 55°C unless otherwise specified

Slit

Slit width	Sensing distance	Minimum detectable object (reference value)	Quantity	Remarks	Order code
1 mm × 20 mm	E3JM-10⬜4(T)-NN	1.2 m	1-mm dia.	1 Slit each for the Emitter and Receiver (2 Slits total)	(Seal-type long slit) Can be used with the E3JM-10⬜4(T)-NN, E3JM-10⬜4(T)-G-NN and E3JM-10⬜4(T)-NN-US Models.	E39-S39

Slit width

Sensing distance

Minimum detectable object
(reference value)

Quantity

Remarks

Order code

1 mm × 20 mm

E3JM-10⬜4(T)-NN

1.2 m

1-mm dia.

1 Slit each for the Emitter and Receiver (2 Slits total)

(Seal-type long slit)

Can be used with the
E3JM-10⬜4(T)-NN,
E3JM-10⬜4(T)-G-NN and
E3JM-10⬜4(T)-NN-US Models.

E39-S39

Note: A Slit is not provided with the Sensor for through-beam. Order a Slit separately if required.

Reflectors

Sensing distance	Quantity	Remarks	Model
E3JM-R4⬜4(T)	4 m	1	Provided with the E3JM-R4⬜4(T), E3JM-R4⬜4(T)-G and E3JM-R4⬜4(T)-US Models.	E39-R1

Sensing distance

Quantity

Remarks

Model

E3JM-R4⬜4(T)

4 m

Provided with the E3JM-R4⬜4(T),

E3JM-R4⬜4(T)-G and E3JM-R4⬜4(T)-US Models.

E39-R1

Note • The E39-R1 Reflector is provided with the Sensor. Order other Reflectors separately if required.
• Refer to Reflectors on E39-L/E39-S/E39-R on your OMRON website for details.

Type	Housing material	Features	Size in mm	Applicable Sensor		Order code
General purpose reflectors	ABS base Acrylic surface	Surface screw mounting (diagonal holes)	40 × 60 × 7.5	Retro-reflective photoelectric sensors with and without M.S.R		E39-R1S
		Surface screw mounting (holes on one side only)	35.4 × 42.3 × 8			E39-R9
		Surface screw mounting (holes on one side only)	51.4 × 60.3 × 8.5			E39-R42
Small size	ABS base Acrylic surface	Side screw mounting or surface selfadhesive	41.8 × 22.5 × 11			E39-R3
Small size	ABS base Acrylic surface	Surface screw mounting	23 × 13.7 × 4.9			E39-R4
Large size	ABS base Acrylic surface		100 × 100 × 9			E39-R8
Large size	ABS base Acrylic surface		84.5 × 84.5 × 8.7			E39-R40
High precision	ABS base Acrylic surface	Microtripel for improved performance with fine beam sensors	52 × 40 × 4.8	Recommended for fine beam coaxial models (E3NC-LH03, E3S-DB, E3T-SR4)		E39-R6
			30 × 45			E39-R12
			14 × 23 × 1			E39-R37-CA
			12 × 24			E39-R13
Simple mounting	ABS base Acrylic surface	Round shape with centered mounting hole for simple screw mounting	Diameter: 84 Depth: 7.4	Photoelectric sensors with and without M.S.R.		E39-R7
Enhanced detergent resistance	PVC	Surface screw mounting IP69k after DIN 40050 part 9	40 × 60 × 7.5	Recommended for harsh environment sensors		E39-R50
	PET	Surface screw mounting IP69k after DIN 40050 part 9 Anti-fogging coating	40 × 60 × 7.5			E39-R50K
	PVC	Surface screw mounting IP69k after DIN 40050 part 9	20 × 60 × 6			E39-R51
Highest detergent resistance	SUS316L Borosilicat	Surface screw mounting	43 × 30 × 5			E39-R16
Heat resistant	Borosilicat	Surface screw mounting 450°C heat resistance Suitable for vacuum environment	95 × 51 × 8			E39-R47
Non-fogging reflector	ABS Acrylic surface	Anti-fogging coating	40 × 60 × 7.5			E39-R1K
Special polarizing	ABS base PMMA surface	Special polarizing filter to PET	44 × 80 × 8.5	E3ZM-B, E3FA-B, E3FB-B, E3S-DB		E39-RP1
Oil-resistant Reflector	Methacrylate resin surface Aluminium, Stainless steel screws	Resistant to cutting oil	65.4 × 106 × 11.5	E3ZR-C		E39-R1R
General purpose tape reflectors	Acrylic	Self adhesive Pre cut	35 × 10 × 0.6	Photoelectric sensors with and without M.S.R.		E39-RS1
			35 × 10 × 0.6		Optimised for E3T-SR4	E39-RS1-CA
			40 × 35 × 0.6			E39-RS2
			40 × 35 × 0.6		Optimised for E3T-SR4	E39-RS2-CA
			80 × 70 × 0.6			E39-RS3
			80 × 70 × 0.6		Optimised for E3T-SR4	E39-RS3-CA
		Self adhesive Cut-to-length, roll material	25 mm × 5 m			E39-RS25 5 m
			25 mm × 22.8 m			E39-RS25 22.8 m
			50 mm × 5 m			E39-RS50 5 m
			50 mm × 22.8 m			E39-RS50 22.8 m
High precision tape reflectors		Self adhesive Pre cut	195 × 22	Recommended for fine beam and laser sensors (E3NC-LH03, E3Z-LR, E3S-DB_2)		E39-RS4
High precision tape reflectors		Self adhesive Pre cut	108 × 46			E39-RS5

Note: the ambient operating temperature is -25°C to 55°C unless otherwise specified

Mounting brackets

Appearance	Quantity	Remarks	Order code
	1	Provided with the E3JM.	E39-L53
	1	Height of optical axis can be adjusted.	E39-L51

Note • Some Mounting Brackets are provided with the Sensor. Order other Mounting Brackets separately if required.
• When using a Through-beam Sensor, order one Connector for the Receiver and one for the Emitter.
• Refer to Mounting Brackets on E39-L/E39-S/E39-R on your OMRON website for details.

Mounting brackets

Type	Material	Features	Order code
M8 nuts	brass	100 pcs	ASMM0800
M8 nuts	stainless steel		ASMM0801
M12 nuts	brass		ASMM1200
M18 nuts	brass		ASMM1800
	stainless steel		ASMM1802
	plastic	1 pc	ASMK1802 (8 mm thickness)
	plastic	100 pcs	ASMK1801 (4 mm thickness)
M30 nuts	brass	100 pcs	ASMM3000
M8 Washer	brass	1,000 pcs	ASZA0800
M12 Washer	brass	1,000 pcs	ASZA1200
M12 Washer	stainless steel	500pcs	ASZA1201
M18 Washer	brass	100 pcs	ASZA1801
M18 Washer	stainless steel	200 pcs	ASZA1802
M30 Washer	brass	100 pcs	ASZA3001

E39/Y92E-B

Accessories

Mounting brackets

Shape	Type	Order code
	Quick access - snap fix for cylindrical sensors; sizes M8, M12, M18, M30	Y92E-BC08 Y92E-BC12 Y92E-BC18 Y92E-BC30
	Surface mounting for M18 cylindrical sensors (dia 18mm)	E39-L183
	Standard-surface mounting (for pre-wired or pigtail models)	E39-L1041
	Standard-backwall mounting	E39-L441
	Protection-wall mounting (for pre-wired or pigtail models)	E39-L1421
	Protection-surface mounting	E39-L981
	Telescope mounting	E39-L93FH
	3D rotation mounting	E39-EL4

1. The order references are examples for the E3Z sensor family. Refer to the sensor accessory datasheet E26E for the complete list of mounting brackets.

Спецификации

E3JM Спецификация

enPDF 941,5 КБ

Показать все Спецификации