E2E NEXT 2-wires
Бесконтактный датчик E2E NEXT
Большое расстояние обнаружения предотвращает непредвиденные остановки оборудования
- Самая большая в мире дистанция срабатывания
- Почти вдвое больше дистанции срабатывания предшествующих моделей
- Индикатор с углом обзора 360°, со светодиодом высокой яркости.
- Всего 10 секунд требуются для замены бесконтактного датчика благодаря монтажному кронштейну "e-jig"
- Кабели с повышенной маслостойкостью.
Ordering information
Sensors
Long-distance type/DC 2-wire
 | |||||||
 | |||||||
Standard-distance type/DC 2-wire
 | |||||||
Accessories
Sensor I/O Connectors (Sockets on One Cable End)
(Models for Pre-wired Connectors) A Sensor I/O Connector is not provided with the Sensor. It must be ordered separately as required.
| M12 Straight, Smartclick Connectors  | |||||
e-jig (Mounting Sleeves)
A Mounting Bracket is not provided with the Sensor. It must be ordered separately as required.
 | |||
Note: Mounting Brackets are not Spatter-resistant Models.
Specifications
Long-distance type/DC 2-wire
| Setting distance7 | |||||||||
| Response frequency8 | |||||||||
| Polarity: 3 V max. (Load current: 100 mA, Cable length: 2 m) No polarity: 5 V max. (Load current: 100 mA, Cable length: 2 m) | |||||||||
| D1 Models: Operation indicator (orange), Setting indicator (green) | |||||||||
| Operating: -25 to 70°C, Storage: -40 to 85°C (with no icing or condensation) | |||||||||
| ±10% max. of sensing distance at 23°C | ±20% max. of sensing distance at 23°C in the temperature range of | ±10% max. of sensing distance at 23°C in the temperature range of | ±20% max. of sensing distance at 23°C in the temperature range of -25 to 70°C | ||||||
| ±1% max. of sensing distance at rated voltage in the rated voltage ±15% range | |||||||||
| 50 MΩ min. (at 500 VDC) between current-carrying parts and case | |||||||||
| 1,000 VAC, 50/60 Hz for 1 minute between current-carrying parts and case | |||||||||
| 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions | |||||||||
| Pre-wired Models/Pre-wired Connector Models: IP67 (IEC 60529), IP67G9 (JIS C 0920 Annex 1) Passed OMRON's Oil-resistant Component Evaluation Standards10 (Cutting oil type: specified in JIS K 2241:2000, Temperature: 35 °C max.) and IEC 60529 (old standard: DIN 40050 PART9) IP69K | |||||||||
| Pre-wired Models (Standard cable length: 2 m) and Pre-wired Connector Models (Standard cable length: 0.3 m) | |||||||||
Standard-distance type)/DC 2-wire
| Setting distance11 | ||||
| Response frequency12 | ||||
| Polarity: 3 V max. (Load current: 100 mA, Cable length: 2 m) No polarity: 5 V max. (Load current: 100 mA, Cable length: 2 m) | ||||
| D1 Models: Operation indicator (orange), Setting indicator (green) | ||||
| Operating: -25 to 70°C, Storage: -40 to 85°C (with no icing or condensation) | ||||
| ±10% max. of sensing distance at 23°C in the temperature range of -25 to 70°C | ||||
| ±1% max. of sensing distance at rated voltage in the rated voltage ±15% range | ||||
| 50 MΩ min. (at 500 VDC) between current-carrying parts and case | ||||
| 1,000 VAC, 50/60 Hz for 1 minute between current-carrying parts and case | ||||
| 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions | ||||
| Pre-wired Models/Pre-wired Connector Models: IP67 (IEC 60529), IP67G13 (JIS C 0920 Annex 1) Passed OMRON's Oil-resistant Component Evaluation Standards14 (Cutting oil type: specified in JIS K 2241:2000, Temperature: 35°C max.) and IEC 60529 (old standard: DIN 40050 PART9) IP69K | ||||
| Pre-wired Models (Standard cable length: 2 m) and Pre-wired Connector Models (Standard cable length: 0.3 m) | ||||
Accessories (Sold Separately)
Sensor I/O Connectors
| Tensile: 100 N/15 s, Torsion: 1 N·m/15 s (for cable diameter of 6 mm) | |
| 10 times max. (Limited to the same external diameter and wire diameter.) |
2-year oil resistance indicates the median value of the product design and the oil-resistance performance criterion result (=Typical value).
Products to be shipped will have around 2 years of oil resistance, but will very depending on the product.
2-year oil resistance is verified by Pre-wired models (2 m/5 m).
The degree of protection is not satisfied with the part where cable wires are uncovered for the Pre-wired Models and the connector part for the Pre-wired Connector Models.
2-year oil resistance indicates the median value of the product design and the oil-resistance performance criterion result (=Typical value).
Products to be shipped will have around 2 years of oil resistance, but will very depending on the product.
2-year oil resistance is verified by Pre-wired models (2 m/5 m).
The degree of protection is not satisfied with the part where cable wires are uncovered for the Pre-wired Models and the connector part for the Pre-wired Connector Models.
2-year oil resistance indicates the median value of the product design and the oil-resistance performance criterion result (=Typical value).
Products to be shipped will have around 2 years of oil resistance, but will very depending on the product.
2-year oil resistance is verified by Pre-wired models (2 m/5 m).
The degree of protection is not satisfied with the part where cable wires are uncovered for the Pre-wired Models and the connector part for the Pre-wired Connector Models.
2-year oil resistance indicates the median value of the product design and the oil-resistance performance criterion result (=Typical value).
Products to be shipped will have around 2 years of oil resistance, but will very depending on the product.
2-year oil resistance is verified by Pre-wired models (2 m/5 m).
The degree of protection is not satisfied with the part where cable wires are uncovered for the Pre-wired Models and the connector part for the Pre-wired Connector Models.
XS2
XS3
XS5C/XS5G
Y92E-S_PP
