Контакты

(383)383-25-35
г. Новосибирск, мкр. Горский, 66, 2 этаж

E3NX-FA

Высокопроизводительный цифровой волоконный усилитель

Усилитель E3NX-FA является оптимальным выбором для самых сложных областей применения волокна (большого расстояния срабатывания, точного обнаружения объектов или высокоскоростных процессов).

Простое программирование за несколько секунд благодаря интеллектуальной настройке
Новая технология N-Smart обеспечивает значительное увеличение расстояния срабатывания, повышение точности обнаружения объектов и увеличение скорости
Простая и понятная информация о состоянии датчика благодаря Solution Viewer и функции Change Finder
Коммуникационный блок EtherCAT для высокоскоростной связи

N-Smart technology

Высокоэффективный элемент связи GIGA RAY 2S обеспечивает чистый сигнал и широкий динамический диапазон. Он дополнен новым алгоритмом приема света “Smart Noise Reduction” и высокоскоростной и высокоточной ИС “N-Core”. Эти три технологии повышают стандартную производительность E3NX-FA, которая влияет на соотношение сигнала к шуму (который теперь в 2,5 раза выше по сравнению со стандартными моделями).

Dynamic Power Control

Динамическое регулирование мощности (DPC) автоматически компенсирует разницу в уровнях падения, обусловленных наличием грязи или вибрации. Кроме того, по достижению датчиком предела корректировки генерируется выходной предупреждающий сигнал о необходимости проведения профилактического обслуживания.

Timer functions

Регулирование длины выходного сигнала и настройка по времени:

T1 ВКЛ - время задержки
T2 ВЫКЛ - время задержки
T1 и T2 можно устанавливать отдельно

Ordering information

Fiber Amplifier Units

Type	Connecting method	Inputs/outputs	Order code
Type	Connecting method	Inputs/outputs	NPN output	PNP output
Standard models	Pre-wired (2 m)	1 output	E3NX-FA11 2M	E3NX-FA41 2M
	Pre-wired (2 m)	1 output	E3NX-FA11-5 2M1	−
	Wire-saving Connector	1 output	E3NX-FA6	E3NX-FA8
Advanced models	Pre-wired (2 m)	2 outputs + 1 input	E3NX-FA21 2M	E3NX-FA51 2M
	Wire-saving Connector	1 output + 1 input	E3NX-FA7	E3NX-FA9
	Wire-saving Connector	2 outputs	E3NX-FA7TW	E3NX-FA9TW
	M8 Connector	1 output + 1 input	E3NX-FA24	E3NX-FA54
	M8 Connector	2 outputs	−	E3NX-FA54TW
Infrared models	Pre-wired (2 m)	1 output	E3NX-FAH11 2M	E3NX-FAH41 2M
Infrared models	Wire-saving Connector	1 output	E3NX-FAH6	E3NX-FAH8
Analog output models	Pre-wired (2 m)	2 outputs	E3NX-FA11AN 2M	E3NX-FA41AN 2M
Model for Sensor Communications Unit2	Connector for Sensor Communications Unit	−	E3NX-FA0
Model for Sensor Communications Unit2	Connector for Sensor Communications Unit	−	E3NX-FAH0

Accessories (Sold Separately)

Fiber amplifier connectors

Type	Cable length	No. of conductors	Applicable Fiber Amplifier Units	Order code
Master Connector	2 m	4	E3NX-FA7 E3NX-FA7TW E3NX-FA9 E3NX-FA9TW	E3X-CN21
Slave Connector		2	E3NX-FA7 E3NX-FA7TW E3NX-FA9 E3NX-FA9TW	E3X-CN22
Master Connector		3	E3NX-FA6 E3NX-FA8	E3X-CN11
Slave Connector		1	E3NX-FA6 E3NX-FA8	E3X-CN12

Size	Cable	Appearance	Cable type		Order code
M8	Standard cable	Straight	2 m	4-wire	XS3F-M421-402-A
		Straight	5 m		XS3F-M421-405-A
		L-shaped	2 m		XS3F-M422-402-A
		L-shaped	5 m		XS3F-M422-405-A

Communication units

Type	Appearance	Order code
Sensor Communications Unit for EtherCAT		E3NW-ECT
Sensor Communications Unit for CompoNet		E3NW-CRT3
Sensor Communications Unit for CC-Link		E3NW-CCL
Distributed Sensor Unit4		E3NW-DS

Note: Refer to your OMRON website for details.

Specifications

Standard models/ Advanced models/ Infrared models

Type		Standard models			Advanced models					Infrared models
NPN output		E3NX-FA11	E3NX-FA6	E3NX-FA11-5 5	E3NX-FA21	E3NX-FA7	E3NX-FA7TW	E3NX-FA24	−	E3NX-FAH11	E3NX-FAH6
PNP output		E3NX-FA41	E3NX-FA8	−	E3NX-FA51	E3NX-FA9	E3NX-FA9TW	E3NX-FA54	E3NX-FA54TW	E3NX-FAH41	E3NX-FAH8
Connecting method		Pre-wired	Wire-saving Connector	Pre-wired	Pre-wired	Wire-saving Connector		M8 Connector		Pre-wired	Wire-saving Connector
Inputs/outputs	Outputs	1 output			2 outputs	1 output	2 outputs	1 output	2 outputs	1 outputs
Inputs/outputs	External inputs	−			1 input	1 input	−	1 input	−	−
Light source (wavelength)		Red, 4-element LED (625 nm)								Infrared LED (870 nm)
Power supply voltage		10 to 30 VDC, including 10% ripple (p-p)
Protection circuits		Power supply reverse polarity protection, output short-circuit protection, and output reverse polarity protection
Response time	Super-high-speed mode (SHS)	Operate or reset for model with 1 output: 30 µs (Super High Speed mode (SHS2) of E3NX-FA11-5 is 60 µs each), with 2 outputs: 32 µs
	High-speed mode (HS)	Operate or reset: 250 µs
	Standard mode (Stnd)	Operate or reset: 1 ms
	Giga-power mode (GIGA)	Operate or reset: 16 ms
Sensitivity adjustment		Smart Tuning (2-point tuning, full auto tuning, position tuning, maximum sensitivity tuning, power tuning, or percentage tuning (−99% to 99%)) or manual adjustment
Maximum connectable Units		30
No. of Units for mutual interference prevention6	Super-high-speed mode (SHS)	0 2 units when the detection mode is set to Super High Speed mode (SHS2), and for other models, the mutual interference prevention function is disabled.
	High-speed mode (HS)	10
	Standard mode (Stnd)	10
	Giga-power mode (GIGA)	10
Functions		Automatic power control (APC), Dynamic power control (DPC), Timer, Zero reset, Resetting settings, Eco mode, Bank switching, Power tuning

Analog output models/Model for Sensor Communications Unit

Type		Analog output models	Model for Sensor Communications Unit
NPN output		E3NX-FA11AN	E3NX-FA0	E3NX-FAH0
PNP output		E3NX-FA41AN	E3NX-FA0	E3NX-FAH0
Connecting method		Pre-wired	Connector for Sensor Communications Unit
Inputs/outputs	Outputs	2 outputs	− 7	− 1
Inputs/outputs	External inputs	−	− 7	− 1
Light source (wavelength)		Red, 4-element LED (625 nm)		Infrared LED (870 nm)
Power supply voltage		10 to 30 VDC, including 10% ripple (p-p)	Supplied from the connector through the communication units.
Control output		Load power supply voltage: 30 VDC max., open-collector output (depends on the NPN/PNP output format) Load current: Groups of 1 to 3 Amplifier Units: 100 mA max., Groups of 4 to 30 Amplifier Units: 20 mA max. (Residual voltage: At load current of less than 10 mA: 1 V max. At load current of 10 to 100 mA: 2 V max.) OFF current: 0.1 mA max.	−
Analog output		Voltage output: 1-5 VDC (10 kΩ or more connected load), temperature characteristics: 0.3% F.S. / °C	−
Control output Response time	Super-high-speed mode (SHS)	Operate or reset: 80 µs	Operate or reset: 32 µs
	High-speed mode (HS)	Operate or reset: 250 µs	Operate or reset: 250 µs
	Standard mode (Stnd)	Operate or reset: 1 ms	Operate or reset: 1 ms
	Giga-power mode (GIGA)	Operate or reset: 16 ms	Operate or reset: 16 ms
Sensitivity adjustment		Smart Tuning (2-point tuning, full auto tuning, position tuning, maximum sensitivity tuning, power tuning, percentage tuning (-99% to 99%)) or manual adjustment
Maximum connectable Units		30	With E3NW-ECT: 30 units (When connected to an OMRON NJ-series Controller.) With E3NW-CRT: 16 units (Note: E3NX-FAH0 can not be connected.) With E3NW-CCL: 16 units
No. of Units for mutual interference prevention8	Super-high-speed mode (SHS)	0 (The mutual interference prevention function is disabled if the detection mode is set to super-high-speed mode.)
	High-speed mode (HS)	10
	Standard mode (Stnd)	10
	Giga-power mode (GIGA)	10
Functions		Automatic power control (APC), Dynamic power control (DPC), Timer, Zero reset, Resetting settings, Eco mode, Bank switching, Power tuning

Easy One-Button-Teaching/Smart Tuning

Easy setting of optimum power and threshold by pushing tune button twice.

Smart power control

Enhanced signal stability control for compensating power reductions caused by temperature drift, dust or aging of LED. Alarm output added for predictive maintenance.

N-Smart platform

The N-Smart platform provides wide portfolio of advanced sensors − all with the same intuitive operation concept and field bus connectivity.

1. This type can prevent mutual interference for two units in the SHS2 mode.

2. A Sensor Communications Unit is required if you want to use the Fiber Amplifier Unit on a network.

3. Only E3NX-FA0 can be connected to E3NW-CRT.

4. The Distributed Sensor Unit can be connected to any of the Sensor Communications Units.

5. This type can prevent mutual interference for two units in the SHS2 mode.

6. The tuning will not change the number of units. The least unit count among the mutual interference prevention units of E3NX and E3NC.

7. Two sensor outputs are allocated in the programmable logic controller PLC I/O table.
PLC operation via Communications Unit enables reading detected values and changing settings.

8. The tuning will not change the number of units.
The least unit count among the mutual interference prevention units of E3NX and E3NC.