H3YN / H3YN-B

Компактные многофункциональные таймеры для установки в монтажную колодку

Доступна монтажная колодка с безвинтовыми клеммами типа «Push-in plus» (PYF-__-PU) — удобное подключение проводов.
Простая замена — сокращение времени обслуживания системы.
Компактный корпус шириной 21,5 мм — экономия места.
Большой прозрачный диск — простая установка времени срабатывания.

Ordering information

Operating modes	Control output	Supply voltage	Order code
Operating modes	Control output	Supply voltage	Short-time range (0.1 s to 10 min)	Long-time range (0.1 m to 10 h)
On-delay, Interval, Flicker OFF-start, Flicker ON Start	DPDT	24 VAC	H3YN-2-B AC24	H3YN-21-B AC24
		48 VDC	H3YN-2-B DC48	H3YN-21-B DC48
		24 VDC	H3YN-2-B DC24	H3YN-21-B DC24
		12 VDC	H3YN-2-B DC12	H3YN-21-B DC12
		100 to 120 VAC	H3YN-2-B AC100-120	H3YN-21-B AC100-120
		200 to 230 VAC	H3YN-2-B AC200-230	H3YN-21-B AC200-230
		100 to 110 VDC	H3YN-2-B DC100-110	H3YN-21-B DC100-110
		125 VDC	H3YN-2-B DC125	H3YN-21-B DC125
	4PDT	24 VAC	H3YN-4-B AC24	H3YN-41-B AC24
		48 VDC	H3YN-4-B DC48	H3YN-41-B DC48
		24 VDC	H3YN-4-B DC24	H3YN-41-B DC24
		12 VDC	H3YN-4-B DC12	H3YN-41-B DC12
		100 to 120 VAC	H3YN-4-B AC100-120	H3YN-41-B AC100-120
		200 to 230 VAC	H3YN-4-B AC200-230	H3YN-41-B AC200-230
		100 to 110 VDC	H3YN-4-B DC100-110	H3YN-41-B DC100-110
		125 VDC	H3YN-4-B DC125	H3YN-41-B DC125
	4PDT, Twin Contact	24 VDC	H3YN-4-Z-B DC24	H3YN-41-Z-B DC24

Note: There are other models with Screw socket compatibility available on request (grey version). Please contact your Omron representative for special request.

Accessories

Plug-in Socket

Type	Timer	Order code
Type	Timer	Order code
Screwless socket with Push-in plus technology	H3YN-2-B/H3YN-21-B	PYF-08-PU-L
Screwless socket with Push-in plus technology	H3YN-4-B/H3YN-41-B/H3YN-41-Z-B	PYF-14-PU-L

Hold-down clip

Type	Order code
PYF-08-PU-L/PYF-14-PU-L	Y92H-3 (2 pcs in a pack)

Specifications

Item	H3YN-2-B/H3YN-21-B	H3YN-4-B/H3YN-41-B/H3YN-41-Z-B
Time ranges	0.1 s to 10 min (1 s, 10 s, 1 min, or 10 min max. selectable)	0.1 min to 10 h (1 min, 10 min, 1 h, or 10 h max. selectable)
Rated supply voltage1	24, 100 to 120, 200 to 230 VAC (50/60 Hz), 12, 24, 48, 100-110, 125 VDC
Pin type	Plug-in
Operating mode	ON-delay, interval, flicker OFF-start, or flicker-ON start selectable by DIP switch
Operating voltage range	85% to 110% of rated supply voltage (12 VDC: 90% to 110% of rated supply voltage)2
Reset voltage	10% max. of rated supply voltage
Control outputs	DPDT: 5 A at 250 VAC, resistive load (cosφ = 1) The minimum applicable load is 1 mA at 5 VDC (P reference value). Contact materials: Ag 4PDT: 3 A at 250 VAC, resistive load (cosφ = 1) H3YN-4-B/-41-B series: The minimum applicable load is 1 mA at 1 VDC (P reference value) H3YN-4-Z/-41-Z-B series: The minimum applicable load is 1 mA at 1 VDC (P reference value) Contact materials: Au-clad + Ag-alloy
Accuracy of operating time	±1% FS max. (1 s range: ±1%±10 ms max.)
Setting error	±10% ±50 ms FS max.
Reset time	Min. power-opening time: 0.1 s max. (including halfway reset)
Influence of voltage	±2% FS max.
Influence of temperature	±2% FS max.
Ambient temperature	Operating: −10°C to 55°C (with no icing) Storage: −25°C to 65°C (with no icing)
Degree of protection	IP40 (Terminal screw sections are excluded.)
Size in mm (H × W × D)	28 × 21.5 × 52.6

1. Refer to Safety Precautions for All Times when combining the timer with an AC 2-wire proximity sensor.

2. When using the H3YN in any place where the ambient temperature is more than 50°C, supply 90% to 110% of the rated voltages (12 VDC: 95% to 110% of the rated voltage).

1. Refer to Safety Precautions for All Times when combining the timer with an AC 2-wire proximity sensor.

2. When using the H3YN in any place where the ambient temperature is more than 50°C, supply 90% to 110% of the rated voltages (12 VDC: 95% to 110% of the rated voltage).