Серия D6FZ-FGS

Определяет утечки трубопроводе сжатого воздуха

Измеряет утечки, объем потребления и давление воздуха, для оптимизации управление электроэнергией в трубопроводе воздуха. Датчики расхода воздуха серии D6FZ-FGS1000 отображают невидимый раньше расход электроэнергии в системе сжатого воздуха и оптимизирует работу службы главного энергетика

Высокоточные измерения расхода воздуха
Определение утечек, измерение используемого объема, давления и температуры с помощью одного уникального прибора
2 аналоговых и 2 импульсных выхода
Интерфейс RS485
Высокая степень защиты: IP64
Устанавливается на изогнутую трубу или соединитель
Индикатор срабатывания
Пороговое значение (пиковое/минимальное/утечка)
Удержание тревожного сигнала

Ordering information

Units

Appearance	Product name	Order code
	Air flow sensor (200L type)	D6FZ-FGT200
	Air flow sensor (500L type)	D6FZ-FGT500
	Air flow sensor (1000L type, cable length: 0.2 m)	D6FZ-FGS1000
	Air flow station (Cable length 1.5 m, including T-branch connector cable)	D6FZ-FGX21
	Air flow sensor set (1000L type) Air flow sensor (1000L type) Air flow station T-branch connector Single-end wire cable (3 m)	D6FZ-FGS1000-S

Accessories (sold separately)

Product name			Order code
T-branch connector			D6FZ-FC02
(Air flow sensor D6FZ-FGT only) Mounting bracket Mounting bracket: 1 Plus screw (M3): 4			D6FZ-FC03
(Air flow station D6FZ-FGX21 only) Mounting magnet Mounting magnet: 2 Plus screw (M3): 2			ZN9-EM01-S
Single-end wire cable	Cable length 3 m	M12 connector (8 pin)	D6FZ-JD3A
	Cable length 10 m		D6FZ-JD10A
	Cable length 20 m		D6FZ-JD20A
Double-end connector cable	Cable length 3 m	M12 connector (8 pin)	D6FZ-JD3B
	Cable length 5 m		D6FZ-JD5B
	Cable length 10 m		D6FZ-JD10B
	Cable length 20 m		D6FZ-JD20B

Specifications

Air flow sensor

Item		Model	D6FZ-FGT200	D6FZ-FGT500
Applicable fluid			Air, nitrogen (N2)1
Working pressure			0.75 MPa (withstands pressure of 1.5MPa)
Measurement range2			0 to 200 L/min	0 to 500 L/min
Accuracy2			±2.0%F.S. at 50 L/min or more
Accuracy2			±0.5%F.S. at less than 50 L/min
Pressure loss			2 kPa max.	4 kPa max.
Power supply voltage			12 to 24 VDC ±10% ripple (p-p) 10% max.
Current consumption			120 mA max.
Functions			Momentary flow/integrated flow/reversing display/zero point adjustment/peak and bottom hold/key lock/eco model/scaling (analog output)/judgement hysteresis/teaching
Output	Output interface	Analog	Current output 4 to 20 mA (1 contact), maximum load resistance 300 Ω max.
		ON/OFF	Open collector output (2 outputs) 26.4 VDC 50 mA max. ON residual voltage 2 V max. (Outputs can be selected from judgement output, pulse output and unit error output)
		RS-485	2-wire half duplex communication, start-stop synchronized method Baud rate: 9.6k/19.2k/38.4k/115.2kbps, data bit length: 7/8bit, stop bit length: 1/2bit, parity: none/even/odd, termination resister (120 Ω ): ON/OFF, communications protocol: compatible with CompoWay/F
	Output values		Momentary flow, integrated flow, judgement output, unit error output
Connection bore diameter			Rc1/4 (8 A)	Rc1/2 (15 A)
Dimensions			30(W) × 77(D) × 63.7(H) mm
Weight (when packaged)			Approx. 400 g (500 g)

Item		Model	D6FZ-FGS1000
Applicable fluid			Air, nitrogen (N2)
Working pressure			0.99 MPa max.
Measurement	Flow	Detection range	1 to 1,000 L/min (std)
		Resolution	0.1 L/min
		Accuracy	±2.0% of reading at 50 L/min (std) or more
		Accuracy	±0.1%F.S. at less than 50 L/min
	Pressure	Detection range	0 to 0.99 MPa
	Pressure	Accuracy	±2%F.S.
	Temperature	Detection range	-10 to 60°C
	Temperature	Accuracy	±1.5% (absolute temperature)
Pressure loss			Direct piping:10 kPa max. (0.5 MPa, at maximum flow) Using coupler (TL type by NAGAHORI INDUSTRY CO., LTD.): 10 kPa max. (0.5 MPa, at maximum flow)
Power supply voltage			16 to 24 VDC ±10% ripple (p-p) 10% max. (Using single unit), 24 VDC ±10% ripple (p-p) 10% max. (Using multiple units)
Power consumption			2 W max.
Output	Output interface	Analog	Current output 4 to 20 mA (2 contact)3 Max. load resistance 270 Ω max.
		ON/OFF	Open drain output (2 outputs)4 24 VDC 50mA max. ON residual voltage 1.5 V max., OFF leakage current 50 µA max.
		RS-485	2-wire half duplex communication, start-stop synchronized method Baud rate: 115.2 kbps (fixed), Data bit length: 8 bits (fixed), stop bit length: 1 bit (fixed), parity: even (fixed), communications protocol: compatible with CompoWay/F
	Outpus values		Momentary standard flow, integrated standard flow, pressure, unit error output
Wiring connection			M12 connector (8-pin)
Connection bore diameter			Rc1 (25 A) bushing enables conversion to 15 A and 20 A
Dimensions			64(W) × 93(D) × 195(H) mm (excluding flange)
Weight (when packaged)			Approx. 1.2 kg (Approx. 1.7 kg)

1. Clean Dry Gas (must not contain large particle e.g. duct, oil and mist)

2. Converted value assuming the accumulated flow quantity following conditions
std (factory default): 20°C at 1 atmospheric pressure 101.3 kPa, nor: 0°C at 1 atmospheric pressure 101.3 kPa

3. Analog output comprise the momentary standard flow rate and pressure.

4. The integrated standard flow of the pulse output can be selected from 1, 10 (factory default), 100, or 1000 L(std)/P.

1. Clean Dry Gas (must not contain large particle e.g. duct, oil and mist)

2. Converted value assuming the accumulated flow quantity following conditions
std (factory default): 20°C at 1 atmospheric pressure 101.3 kPa, nor: 0°C at 1 atmospheric pressure 101.3 kPa

3. Analog output comprise the momentary standard flow rate and pressure.

4. The integrated standard flow of the pulse output can be selected from 1, 10 (factory default), 100, or 1000 L(std)/P.