K3HB-H

Новый скоростной высокоточный индикатор-измеритель температуры

Панельные индикаторы-измерители с аналоговыми входами серии K3HB снабжены ярким и удобным дисплеем, способным изменять цвет показаний. Все модели выпускаются в корпусе с пыле- и водонепроницаемой лицевой панелью со степенью защиты IP66. Приборы серии K3HB отличаются высоким быстродействием при частоте дискретизации 50 Гц.

Графическая шкала уровня повышает наглядность индикации
Возможность дополнения интерфейсом связи (DeviceNet, RS-232C, RS-485)
Двухстрочный, пятиразрядный, двухцветный дисплей
Габариты: Высота 48 x Ширина 96 x Глубина 100 мм

Агрессивная среда

Устройства контроля могут подвергаться агрессивному воздействию среды, во время технологического процесса на них могут попадать брызги или оседать пыль, они могут нагреваться от технологического оборудования. Все устройства E5CN, E5CSV, H7CX, H5CX и K3HB оснащаются передними панелями NEMA4X (эквивалент IP66), поэтому они подходят для использования в таких условиях. Кроме того, благодаря низкопрофильной конструкции устройства меньше выступают на передней части шкафа, поэтому снижается вероятность их загрязнения.

Ordering information

Type of indicator	Input sensor type and range	Supply voltage	Order code
Process indicator K3HB-X	AC current input, from 0.000 to 10.000 A, 0.0000 to 19.999 mA	100 to 240 VAC	K3HB-XAA 100-240VAC
		24 VAC/VDC	K3HB-XAA 24VAC/VDC
	DC current input, from ±199.99 mA, to 4.000 to 20.000 mA	100 to 240 VAC	K3HB-XAD 100-240VAC
	DC current input, from ±199.99 mA, to 4.000 to 20.000 mA	24 VAC/VDC	K3HB-XAD 24VAC/VDC
	AC voltage input, from 0.0 to 400.0 V to 0.0000 to 1.999 V1	100 to 240 VAC	K3HB-XVA 100-240VAC
	DC voltage input, from ±199.99 V to 1.0000 to 5.0000 V	100 to 240 VAC	K3HB-XVD 100-240VAC
	DC voltage input, from ±199.99 V to 1.0000 to 5.0000 V	24 VAC/VDC	K3HB-XVD 24VAC/VDC
Temperature indicator K3HB-H	Temperature input Pt100, thermocouple K, J, T, E, L, U, N, R, S, B, W	100 to 240 VAC	K3HB-HTA 100-240VAC
Temperature indicator K3HB-H		24 VAC/VDC	K3HB-HTA 24VAC/VDC
Weighing indicator K3HB-V	Load cell input (DC low voltage input), 0.00 to 199.99 mV, 0.000 to 19.999 mV, 100.00 mV, 199.999 mV	100 to 240 VAC	K3HB-VLC 100-240 VAC
Weighing indicator K3HB-V		24 VAC/VDC	K3HB-VLC 24VAC/VDC
Linear sensor indicator K3HB-S	DC process input, 0 to 5 V, 1 to 5 V, −5 to 5 V, −10 to 10 V, 0 to 20 mA, 4 to 20 mA	24 VAC/VDC	K3HB-SSD AC/DC24
Linear sensor indicator K3HB-S		100 to 240 VAC	K3HB-SSD AC100-240

Option boards

Sensor power supply/output boards

Slot	Output		Sensor power supply	Communications	Applicable indicator types	Order code
B	Relay	PASS: SPDT	12 VDC ±10%, 80 mA	−	K3HB-X, -H, -S	K33-CPA2
	Linear current	DC0(4) - 20 mA		−	K3HB-X, -H, -S	K33-L1 A3
	Linear voltage	DC0(1) - 5 V, 0 to 10 V		−	K3HB-X, -H, -S	K33-L2A2
	−	−		−	K3HB-X, -H, -S	K33-A2
	−	−		RS-232C	K3HB-X, -H, -S	K33-FLK1 A2
	−	−		RS-485	K3HB-X, -H, -S	K33-FLK3A2
	Relay	PASS: SPDT	10 VDC ±5%, 100 mA	−	K3HB-V	K33-CPB1
	Linear current	DC0(4) - 20 mA		−	K3HB-V	K33-L1B2
	Linear voltage	DC0(1) - 5 V, 0 to 10 V		−	K3HB-V	K33-L2B2
	−	−		−	K3HB-V	K33-B2
	−	−		RS-232C	K3HB-V	K33-FLK1B2
	−	−		RS-485	K3HB-V	K33-FLK3B2

Relay/transistor output boards

Slot	Output		Communications	Order code
C	Relay	H/L: SPDT each	−	K34-C1
	Relay	HH/H/LL/L: SPST-NO each	−	K34-C2
	Transistor	NPN open collector: HH/H/PASS/L/LL	−	K34-T1
	Transistor	PNP open collector: HH/H/PASS/L/LL	−	K34-T2
	−	−	DeviceNet	K34-DRT4

Event input boards

Slot	Input type	Number of points	Communications	Order code 5
D	NPN open collector	5	M3 terminal blocks	K35-1
D	PNP open collector	5	M3 terminal blocks	K35-3

Note: K32-DICN special cable accessory (for event inputs with 8-pin connector) available on request. Please contact your Omron representative.

Specifications

Power supply voltage			100 to 240 VAC (50/60 Hz), 24 VAC/VDC, DeviceNet power supply: 24 VDC
Allowable power supply voltage range			85 to 110% of the rated power supply voltage, DeviceNet power supply: 11 to 25 VDC
Power consumption			100 to 240 V: 18 VA max. (max. load), 24 VAC/DC: 11 VA/7 W max. (max. load)
Display method			Negative LCD (backlit LED) display 7-segment digital display (character height: PV: 14.2 mm (green/red); SV: 4.9 mm (green))
Ambient operating temperature			−10 to 55°C (with no icing or condensation)
Display range			−19,999 to 99,999
Weight			Approx. 300 g (base unit only)
Degree of protection		Front-panel	Conforms to NEMA 4X for indoor use (equivalent to IP66)
		Rear case	IP20
		Terminals	IP00 + finger protection (VDE0106/100)
Memory protection			EEPROM (non-volatile memory), number of rewrites: 100,000
Event input ratings		Contact	ON: 1 kΩ max., OFF: 100 kΩ min.
Event input ratings		No-contact	ON residual voltage: 2 V max., OFF leakage current: 0.1 mA max., load current: 4 mA max. Maximum applied voltage: 30 VDC max.
Output ratings	Transistor output	Maximum load voltage	24 VDC
		Maximum load current	50 mA
		Leakage current	100 µA max.
	Contact output (resistive load)	Rated load	5 A at 250 VAC, 5 A at 30 VDC
		Rated through current	5 A
		Mechanical life expectancy	5,000,000 operations
		Electrical life expectancy	100,000 operations
	Linear output	Allowable load impedance	500 Ω max. (mA); 5 kΩ min. (V)
		Resolution	Approx. 10,000
		Output error	±0.5% FS
Size in mm (H×W×D)			48×96×100

1. There are other models available on request. Please contact your Omron representative for special request.

2. CPA/CPB can be combined with relay outputs only.

3. Only one of the following can be used by each digital indicator: RS-232C/RS-485 communications, a linear output, or DeviceNet communications.
K3HB has got three slots for option boards: Slot B, slot C and slot D.

4. Only one of the following can be used by each digital indicator: RS-232C/RS-485 communications, a linear output, or DeviceNet communications.
K3HB has got three slots for option boards: Slot B, slot C and slot D.

5. There are other models available on request. Please contact your Omron representative for special request.

1. There are other models available on request. Please contact your Omron representative for special request.

2. CPA/CPB can be combined with relay outputs only.

5. There are other models available on request. Please contact your Omron representative for special request.